• two modes for accurate results with athletes and non-athletes

• set height (3'4" to 6'6" / 101 cm. to 198 cm.), weight (23 lbs. to 440.5 lbs. / 10 kg. to 220 kg.), age (NORMAL:  10 to 80 years old or ATHLETE: 18 to 60 years old), gender (male or female) and you are ready to go

• provides accurate and quick results in 7 seconds

• displays Body Fat Percentage (4.0 to 50.0%)

• displays Body Mass Index (7.0 to 90.0)

• displays BMI classification (4 levels)

• comes with instructional manual

• 9 personal profile capability

• includes two AAA batteries 

• measures approximately 8" L x 5" H x 2" W (197 L x 128 H x 49 mm W)

• weighs approximately 8 oz. or 230 g 

Please read the following regarding factors affecting accuracy of body fat readings:

Bioimpedance Bodyfat Analyzers employ a widely used method for determining percent bodyfat.  In this method, a low frequency electrical current is passed through the body.  The current used for the measurement is low, making it safe and imperceptible.  The amount of fat in the body is determined by analyzing the way in which this current passes through the body.  However, other factors can also affect this current flow and, so for accurate readings, the following steps should be adhered to:

THE MOST ACCURATE BODYFAT READINGS CAN BE OBTAINED BY:

1. Urinate prior to taking measurements.

2. Take measurements about 3 hours after eating and/or exercising. 

3. Body should be dry and clean.  If you have sweated significantly since last shower or bath, then for the most accurate readings, you should shower or bath again shortly before taking readings.  Be sure to dry thoroughly.

4. The best time of day to take measurements is the evening.  While other times of the day may not be quite as accurate in absolute terms, they are accurate for the purpose of determining change in percentage bodyfat so long as the readings are taken at the same time in a consistent manner. 

5. If using Tanita combination analyzer scales, be sure soles of feet are clean and dry.  The hands should be clean and dry when using the Omron hand held analyzers. 

6. Read carefully all instructions in manual.

7. Finally, while not as important as the factors above, slightly more accurate readings can sometimes be obtained if clothing is not worn.  If clothing is worn, it should be dry.

We occasionally receive telephone calls from people who say they are not getting accurate readings.  This is almost always caused by not adhering to one or more of the factors above and/or erroneous expectations as to what their bodyfat actually is.  Bioimpedance Bodyfat Analyzers are sophisticated medical devices and as such they must be used properly.